Flexi Transforming Dog

Print-in-place model of a Flexi DogVersion 01 X 2025It transforms from a solid, standing model to a flexi model(except ears and a tail wich are always moving)To lock the legs set them streight down and push up. You will hear a clickThe force and tolerances are set like for kids - but it will depend on the filament usedEars can rotate all aroundA tail can swing to sidesModel can be printed in one color and with few colors on multicolor printer---If you want to sell prints of this model write to me or check a link in my profileVideohttps://www.instagram.com/p/DFpu6gvtJcO/There is more flexi models in my profile---UPDATE 01 X 2025Changed connectors to a new versionNow it will be much harder to take the dog completely apart---3D printing settingsPrinted with PLA (may work better with PET-G)0.1mm and 0.2mm layer height10% grid infill2 walls---FlexiTransformingDog_Brim - will work as a brim for ears and a tail. This will help with bed adhesionSet it to the same place as a base model and merge them togetherConnectors (on legs and body parts) will be printed 'half-in air'There is a 0.2mm gap between connectors and other parts on Z axis - this works like a self supportIt is not recommended to resize model up - apart of connectors looking little worse there should be no problems with the print itself but you may need too much force to transform from solid to flexi and the opposite. You are free to test it thoPrint one single color Dog first before going to print MULTICOLORSee if everything is working fine---Multicolor print:Select FlexiTransformingDog, MULTICOLOR_dark, MULTICOLOR_light and MULTICOLOR_red in your file explorer and move them to the slicerClick 'yes' when asked if you want to add it as one model - it will merge all the files to one. If there will be no such notification merge them by yourself (select all, right click and merge)Then choose a color for each model'Dark' is a nose, center of eyes and paw pads'Light' is outer part of eye'Red' is a mouthIf models are