Slicer Discord
Flexi Transforming Hammerhead Shark – 3D printable model from MakerWorld MakerWorld
Other Toys & Games

Flexi Transforming Hammerhead Shark

61 Downloads
31 Likes
28 Makes
Go to Model
Print-in-place model of a Flexi Hammerhead SharkIt transforms from a solid model to a flexi model The force and tolerances are set like for a kids - but it will also depend on the filament used and print optonsModel can be printed in one color, two color and with 4-6 colors on multicolor printer --- If you want to sell prints of this model I can prepare a commercial license --- Videohttps://www.instagram.com/p/DO-2liljdC_/ More Flexi models in my collection:https://makerworld.com/en/collections/3293549-flexi --- Printing tips Printed with PLA with:0.1mm and 0.16mm layer height15% grid infill3 walls --- Before printing a Shark print a TEST file to check if your filament and slicer settings are rightThe force needed to transform the model will depend on the filament used, printer calibration and slicer settingsIf the force is too low, or its even not holding at all, you can - lower layer height- use an XY compensation (horizontal expansion) with positive values (start with 0.02-0.05)- pr
Category
Other Toys & Games
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
print-in-place design · no supports · 6 colors · 0.16mm layers
Support-free Print-in-place 6 colors / AMS
Supports 0/3
Assembly 0/3
Settings 3/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Colors
6 (AMS/MMU recommended)
Layer height
0.16 mm
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

C47_3D also publishes on

267 additional models across 2 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection