Slicer Discord
Flexi Witch Cat(Clicky hat) – 3D printable model from MyMiniFactory MyMiniFactory
Toys & Games

Flexi Witch Cat(Clicky hat)

0 Downloads
0 Likes
0 Makes
Go to Model
If you want support me or sell physical prints of my designs,please become a Tribe   A tiny cat in a witch hat. There are two versions — with a keychain hole and without. Keycap button needed! Printing and Assembly notes: (Bambu 3mf generated) -AMS needed -Supports needed -Printing time is about 7 hours. -If you print 9 pieces or more, the total printing time is 15 hours. Simply snap the golden part onto the hat after printing. Don’t forget to tag me on social media — I love seeing your prints! Happy printing!
Category
Toys & Games
Source
MyMiniFactory
Published
What you need to print this: Intermediate
Why?
print-in-place design · supports needed · 9-part assembly · 2 colors
Print-in-place Supports required 2 colors / AMS
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
50 mm (Small)
Colors
2 (AMS/MMU recommended)
Est. print time
7 h
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

IDMyron also publishes on

49 additional models across 1 more platforms

Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for Flexi Witch Cat(Clicky hat)?
Any FDM printer should handle Flexi Witch Cat(Clicky hat) just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Flexi Witch Cat(Clicky hat) need supports when printing?
Nope — Flexi Witch Cat(Clicky hat) is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
How long does it take to print Flexi Witch Cat(Clicky hat)?
According to the design notes, Flexi Witch Cat(Clicky hat) takes approximately 7 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
Is Flexi Witch Cat(Clicky hat) beginner-friendly?
Flexi Witch Cat(Clicky hat) is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.
What file format is Flexi Witch Cat(Clicky hat) available in?
Flexi Witch Cat(Clicky hat) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MyMiniFactory.
Is Flexi Witch Cat(Clicky hat) free to download?
Yes, Flexi Witch Cat(Clicky hat) is available as a free download through MyMiniFactory. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

3 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection