Thingiverse
Flexible GPU Storage System v2
door TechAmbrosia
12
Downloads
17
Likes
1
Makes
# GPU Stands v2.0
A major re-working of my original GPU storage stands, these stands include a sizing tool that lets you tailor each stand to both the card in question as well as your 3D printer's individual quirks.
Every board manufacturer specs a different thickness for their card's PCB, and every printer makes 90-degree corners a little differently, and now the sizing tool lets you compensate for both of those factors simultaneously!
See the release video here: https://youtu.be/GZmLRSgrwRQ
To print these, first nail down the stands themselves to get their aesthetics looking good. Then, turn off your printer's brim and print the sizing tool using the same settings. Now, you can check your card's edge connector against the sizing tool and print the correct size stand for the card.
Each stand includes a 15mm-wide spine that allows attaching standard 12mm tape labels to identify each stored card.
With tuned settings, stands print in about an hour and use around 25-35
A major re-working of my original GPU storage stands, these stands include a sizing tool that lets you tailor each stand to both the card in question as well as your 3D printer's individual quirks.
Every board manufacturer specs a different thickness for their card's PCB, and every printer makes 90-degree corners a little differently, and now the sizing tool lets you compensate for both of those factors simultaneously!
See the release video here: https://youtu.be/GZmLRSgrwRQ
To print these, first nail down the stands themselves to get their aesthetics looking good. Then, turn off your printer's brim and print the sizing tool using the same settings. Now, you can check your card's edge connector against the sizing tool and print the correct size stand for the card.
Each stand includes a 15mm-wide spine that allows attaching standard 12mm tape labels to identify each stored card.
With tuned settings, stands print in about an hour and use around 25-35
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
