Flexion Mount for Bowden Setup

Update: V2 just uploaded 8/24/18 that has a couple small updates like larger connector hole size and more material around the bolt holes.

This is my own Flexion extruder mount designed to fit into an 8020 extrusion with M6 bolts. I printed at 0.2mm layer height with a high infill % for strength (above 50%) and supports enabled for the bowden tube connection. If you have simplify3D you might want to do them manually so it doesn't fill the section for the tube but you might have to drill it out regardless.

I printed this out of PLA, though I'll probably switch it to ABS or PETG at some point in the future. Make sure you account for shrinkage otherwise the holes will be too small. Scale it up based on your material (roughly 2% for PLA).

You will also need a pass-through PTFE connector like this one:
https://www.amazon.com/gp/product/B01IB81IHG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1