Slicer Discord
FlexMount Jersey Hanger V2 – 3D-printbaar model van MakerWorld MakerWorld
Organizers

FlexMount Jersey Hanger V2

90 Downloads
20 Likes
48 Makes
Model downloaden
V2 has been uploaded. This hook gives more of a natural curve and eliminates the sharp corner V1 had. I initially wanted to design a small hook that attaches to the track of my ceiling tile so I could hang a standard clothing hanger to display my jerseys, but I got a bit carried away. I figured a full hanger system would look cleaner and be more efficient. With this setup, the arms of the jersey can flair out a bit to show off just a liiiittle bit more. There are two hook styles: one that slides onto a ceiling tile track, and one that can be screwed into a wall. The wall hook needs to be installed upside down (with the “square” on top) so the hanger hides the screws. The ceiling hook should be printed on its side with supports to give it max strength and reduce the risk of snapping. No glue required. The pieces slide together, and the jersey helps hold everything in place. I used PLA for the test run and it feels solid. Once the jersey is on, there’s not much movement, so stress on the
Categorie
Organizers
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gevorderd Lage betrouwbaarheid
Waarom?
supports nodig · uitgebreide nabewerking
Supports vereist Hardware nodig
Supports 2/3
Montage 2/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 2/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Nabewerking
Lijmen, Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie