Thingiverse
Flexure Joystick for Xbox
di akaki
110
Download
86
Likes
0
Makes
An adapter to make your Xbox One or Series S/X controller into a flight stick. Features a compliant design flexure for the hinge, and another flexure for the linkage from the stick to the controller's right thumbstick.
Print all parts as oriented in the STLs. I used 0.2 mm layers, with 3 perimeters, in eSun PLA+, with default settings on an Ender 3 and a Prusa Mini. No supports are needed.
If you have a bad printer, the snap-in ball-and-cradle joint might not fit well. Re-print flexure_joint.stl with XY-compensation set to some appropriate value, or sand the knob, or use heat to remold the shape, etc., until it fits well.
I will make a build video available later. For now, watch the montage in this video: https://www.youtube.com/watch?v=7wZQwBcmanE and then follow these steps:
Slide and glue the X and Y flexure hinges together with 2 drops of CA glue.
Slide and glue the larger half of the stick onto the X flexure hinge.
Snap in the dummy trigger and dummy buttons to their p
Print all parts as oriented in the STLs. I used 0.2 mm layers, with 3 perimeters, in eSun PLA+, with default settings on an Ender 3 and a Prusa Mini. No supports are needed.
If you have a bad printer, the snap-in ball-and-cradle joint might not fit well. Re-print flexure_joint.stl with XY-compensation set to some appropriate value, or sand the knob, or use heat to remold the shape, etc., until it fits well.
I will make a build video available later. For now, watch the montage in this video: https://www.youtube.com/watch?v=7wZQwBcmanE and then follow these steps:
Slide and glue the X and Y flexure hinges together with 2 drops of CA glue.
Slide and glue the larger half of the stick onto the X flexure hinge.
Snap in the dummy trigger and dummy buttons to their p
akaki pubblica anche su
2 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!