Flight Controller Mount for C1 Chaser Wing

I designed this part to make it easy and a very solid attachment to put a flight controller in the C1 Chaser Wing from Banggood. I'm initially using a SPRacing F3 mini but Later I will be installing an Omnubus F4 V2 or V3 flight controller.

Once printed, use a M3 screw (same as most multi-rotor motors and frames use) to cut the threads for the standoffs to screw in the part. Alternatively you can drill the holes out and use an M3 bolt up from the bottom if you like. If cutting threads just try to keep the screw perpendicular to the part so that the standoffs will screw straight up and down into the part.

This mount is to be glued to the foam in the center section.