Floating Ghost Dog Illusion - (Ported)

I ported this pup from m4kerworld so I could print on my K1SE. As I was starting my print, I realized I want the collar to be colored so I just used my slow desktop to do the slice. I will upload the pictures of it once it is finished printing..Floating Ghost Dog Illusioncute, friendly, and a 3D print with a big “wow” effect- no glue is needed — the assembly works with a simple plug-in System!This adorable ghost dog brings a touch of magical Halloween spirit to your home. Thanks to its clever design, it appears to float in mid-air – held only by a chain that gently coils on the ground. The little ghost dog looks cheerful and friendly rather than scary – a perfect decoration to make children smile. Whether placed on a shelf, a windowsill, or as a centerpiece for a Halloween party, it’s sure to catch everyone’s eye. Its playful shape and clean design make it a charming addition to any spooky setup.Print Recommendation:I recommend printing this Models with variable layers, optimized settings.This includes a layer height of 0.16 mm and the upper part of the dog head with a layer height of 0.08 mm and hidden seams. The variable layer height is already set in the 3MF file.The lower part of the Chain is set to 100% infill to balance the flying dog and keep it stable. The infill is already set in the 3MF file.The upright angled position of the dog on the print bed minimizes the chance of print errors and reduces both print time and the amount of support structures needed.Support Structures:Be careful when removing the support structures at the top part of the chain to avoid breaking it.Assemble:Insert the Chain into its matching opening and push it all the way in. Apply gentle pressure to the thicker parts of the objects to avoid cracks or breaks. If you hear a slight crackling sound while inserting the chain into the opening, it’s also could be caused by small filament strings that have formed inside the holes. Just keep pushing gently without to much force.