Floating wheel center cap

This model is inspired by https://www.printables.com/model/660233-floating-center-cap-70mm, but it is completly redesigned by me. It is made for 70mm logo with 57mm inner diameter. This part is suitable for BBS CH-R OEM Audi wheels.

You will need 4pc 608 (608ZZ) bearing with dimensions 22x8x7mm and 28pc ball bearing balls with 5mm diameter as counter weight.

Use PETG or ABS for printing.While printing the counter weight, you have to add pause to the print at layer 33, you have to apply 7 of the 5mm bearing balls to the counter weight slot.

Assembly:

Step 1: First, insert the bearings. However, before inserting them, it's recommended to let them rest in the freezer for 12–24 hours because the inner diameter for the bearing insert is a slightly smaller than the outer diameter of the bearing. This will make the insertion easier and save some effort.

Step 2: Next, insert the counterweight into the bearing.

Step 3: Insert the logo base.

Step 4: Attach the logo to the base. Before do