Flood

 The Model is 200x200mm in size. X and Y can be adjusted but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5 PLA BambuLab Basic Gray Transmission Distance: 3 PLA BambuLab Basic White Transmission Distance: 6 This print uses 4 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #15 (1.28mm) swap to Gray At layer #22 (1.84mm) swap to White for the rest.