Floor and wall leveling laser target posts

Use these marker posts as laser targets when leveling floors or walls. These are 40mm (1½") tall and about 1" wide and 1/32" thick . The base is wide enough to accommodate a common woodworking 1" wide double sided sticky tape.A white filament is probably best as that should make laser beam most easily visible. 9g (⅓ oz) of filament prints six laser target posts. I recommend to clone and print at least a dozen to save on overall printing time by at least 30%.How to use: Apply the double sided tape prior to cutting off individual posts with scissors or a knife. Don't separate by hand because the double-sided tape's backing won't tear off neatly. First separate, then remove the double-sided tape backing. Stick it in the lower points of the floor or wall and in direct view and perpendicular to the laser beam.Once attached to the surface with a double-sided tape these can be left on when you do the self-leveling compound pouring, and then trimmed afterwards with