MakerWorld

2D Art

Florida

by PattersonPrints · 2D Art

31 Downloads

4 Likes

7 Makes

Go to Model

This is a simple model of Florida. It is an easy print and at 10% infill it should take about 3 hours to print.

Category

2D Art

Source

MakerWorld

Published

05.09.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Florida need supports when printing?

No supports needed for Florida — it's designed to print clean off the bed.

How long does it take to print Florida?

According to the design notes, Florida takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Florida available in?

Florida is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Florida free to download?

Yes, Florida is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Florida

Similar Models

Add to Collection