flow calibrate

the most reliable calibration test there is.In 2-perimeter tests you can have errors in line separation that you do not take into account and then they are transmitted to the piece making us lose our minds because "OUCH! the test is fine"0.45mm line, once the file is printed, measure the four sides and adjust the flow according to the rule of 3: (flow/measured)*0.45.example: the walls give me 0.51mm, in this case we have 100% flow so we calculate: (100/0.51)*0.45 = (196.078)*0.45 = 88.235% or wh