Thingiverse
Flow (E multiplier) Calibration Cube Shape
par HTown_Prints
11
Téléchargements
5
Likes
0
Makes
20x20x20 cube type shape includes:
10mm radius on one corner
45 deg chamfer on one corner
45 deg overhang
cutout in floor.
walls have 0.8 mm thickness
base is 1.0 mm thick
I used it to calibrate my flow settings as well as z steps.
Nice step by step here by e3d:
https://e3d-online.dozuki.com/Guide/Flow+rate+(Extrusion+multiplier)+calibration+guide./89
I measured all 4 flats and center of the radius then averaged the value.
10mm radius on one corner
45 deg chamfer on one corner
45 deg overhang
cutout in floor.
walls have 0.8 mm thickness
base is 1.0 mm thick
I used it to calibrate my flow settings as well as z steps.
Nice step by step here by e3d:
https://e3d-online.dozuki.com/Guide/Flow+rate+(Extrusion+multiplier)+calibration+guide./89
I measured all 4 flats and center of the radius then averaged the value.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
