Flow test

by Mdesign · 3D Printer

1.4k Downloads

140 Likes

0 Makes

Go to Model

Turn spiral vase ON! Measure the wall thickness (x) and then calibrate your flow (%). (0.4*100)/x = your flow (%) 20x20x20 mm “cube” with one perimeter with bottom thikness 0,4 mm.

Mdesign also publishes on

160 additional models across 1 more platforms

MakerWorld

160 models

♥ 26,077 ↓ 102,446 ⚒ 66,891

Frequently Asked Questions

Which 3D printer is suitable for Flow test?

Any FDM printer should handle Flow test just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 20 mm is recommended.

Does Flow test need supports when printing?

No supports needed for Flow test — it's designed to print clean off the bed.

What file format is Flow test available in?

Flow test is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.

Is Flow test free to download?

Yes, Flow test is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Flow test

Similar Models

Add to Collection