FlSun S1 Pro PTFE Guide

I designed this PTFE guide to help print brittle material, such as PET-CF and PPA-CF. This machine is capable of printing PPA-CF, but up until I installed this modification, it has always snapped the filament when it homes. I would not recommend homing the toolhead when it is near the front of the machine, but it keeps the filament intact when initiating a print or homing the toolhead near the center or further away from the chamber door. So far it has worked great for PPA-CF, but I have not yet tested it on PET-CF(it is expensive stuff). Made pretty on the fly, so there are a few artifacts of me cutting and mashing things together in Orcaslicer.

Requires:
-20mmx10mmx5mm square magnets [https://www.amazon.com/20x10x5mm-Neodymium-Magnets-Rectangular-Magnetic/dp/B0B6NPPB7K]
-Glue [https://www.amazon.com/Precision-Rhinestones-Jewelry-Making-Repair/dp/B0D3V9NYK8]
-Heat resistant material, the model shown is made of PET-CF I had left over.

I recommend tree supports for the magnet insert