Thingiverse
FLSUN SR, practical lighting
4
Downloads
3
Likes
0
Makes
You want good lighting to check the first layer. With the FLSUN SR, practical lighting can be easily installed later. For this purpose, I have created housings for 24V LED strips from Paulmann. The housings can simply be snapped onto the aluminum profiles of the three columns on the printer.
I have printed the housing parts horizontally to improve the strength in the flexible snappers.
The power supply unit installed in the FLSUN SR supplies 24VDC, just right for the LED strips from Paulmann. Conveniently, there are still free connections for connecting the lighting. The voltage for the lighting can be switched on and off with a simple switch.
The switch can be mounted in the perforated plate of the printer housing without having to drill a hole. Ensure that the wiring is clean and that the solder joints are properly insulated.
Warning:
The electrical installation may only be carried out by persons who have the necessary expertise to do so safely. If in doubt, consult a speciali
I have printed the housing parts horizontally to improve the strength in the flexible snappers.
The power supply unit installed in the FLSUN SR supplies 24VDC, just right for the LED strips from Paulmann. Conveniently, there are still free connections for connecting the lighting. The voltage for the lighting can be switched on and off with a simple switch.
The switch can be mounted in the perforated plate of the printer housing without having to drill a hole. Ensure that the wiring is clean and that the solder joints are properly insulated.
Warning:
The electrical installation may only be carried out by persons who have the necessary expertise to do so safely. If in doubt, consult a speciali
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!