Thingiverse
Fluke TPAK Holder
di Ender_Maker
3
Download
3
Likes
0
Makes
Welcome to my design!
About
This design is my version of the Fluke TPAK hook. I made this attachment to allow me to hang my meter on electrical panels and Romex wires. I have two versions one with a cutout for magnetics and one without. The magnetics cut outs have a diameter of 15.15 mm and a depth of 1.95 mm. You might want to change the magnetics as the ones I used aren't that strong and will not support the weight of the meter. I will update if I find better magnetics.
Compatibility
Should be compatibile with all Flukes that have the cut out for TPAK. I have a Fluke 116 that is shown in the photos.
Print Settings
Infill at least 50%
Print in PLA, ABS or PETG
Any resolution
Supports are needed
About
This design is my version of the Fluke TPAK hook. I made this attachment to allow me to hang my meter on electrical panels and Romex wires. I have two versions one with a cutout for magnetics and one without. The magnetics cut outs have a diameter of 15.15 mm and a depth of 1.95 mm. You might want to change the magnetics as the ones I used aren't that strong and will not support the weight of the meter. I will update if I find better magnetics.
Compatibility
Should be compatibile with all Flukes that have the cut out for TPAK. I have a Fluke 116 that is shown in the photos.
Print Settings
Infill at least 50%
Print in PLA, ABS or PETG
Any resolution
Supports are needed
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!