Slicer Discord
Flute cleaning rod – 3D printable model from MakerWorld MakerWorld
Music

Flute cleaning rod

by SnakeJG · Music
57 Downloads
2 Likes
41 Makes
Go to Model
Flute cleaning rod, printed in two parts that screw securely together. It's the perfect size to fit in a Jupiter flute case, 360mm in length once assembled. I couldn't find a good rod that held together securely, so I made this one using a threaded connection. Set to print horizontally for added strength and speed of printing, it seems plenty strong in basic PLA.I've tested the threads when shrunk 11% in length, so it should still work if you need it a bit shorter, just make sure you shrink both sides by the same percentage.One side has been flattened so it only requires support on the threads. If it isn't threading together well, clean off the supports better.I've tested at 0.16mm Optimal setting with support enabled on an A1 with PLA. I've also included a plate for A1-mini.
Category
Music
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
supports needed
Single piece Supports required Hardware needed
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

1 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection