Thingiverse
Flyers logo
par Persnickety
18
Téléchargements
19
Likes
0
Makes
This is a flat representation of the Philadelphia Flyers NHL hockey team logo. This is my first model, and I wanted to test my dual-extruders.
The proper logo is actually three colors, but I left the orange part out, so there is a nifty hole in the middle.
I learned some things doing this:
- the white border is too narrow, so the extruder didn't 'fill' between its sides.
- my platform must not be level, because the left extruder scraped the surface of the model when the right extruder was working
- I'd probably flip the whole model so that the shiny finish that comes from the platform would end up on the front of the model
The proper logo is actually three colors, but I left the orange part out, so there is a nifty hole in the middle.
I learned some things doing this:
- the white border is too narrow, so the extruder didn't 'fill' between its sides.
- my platform must not be level, because the left extruder scraped the surface of the model when the right extruder was working
- I'd probably flip the whole model so that the shiny finish that comes from the platform would end up on the front of the model
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !