Thingiverse

Flying Figure Stands V2

by smilingpixell

46 Downloads

33 Likes

1 Makes

Second Version of the Flying Figure Stands (FFS) that you can find here https://www.thingiverse.com/thing:2852866

I added a hole in the base to add a 2 eurocent coin. You need it to stabilize the stand.

In the picture you see the coin on top face of the base, but in the .stl file you'll find in the bottom face.

25mm 28mm dungeons and dragons fantasy fly flying miniature miniature 28mm Roleplaying roleplaying game RPG

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Flying Figure Stands V2?

Any FDM printer should handle Flying Figure Stands V2 just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Flying Figure Stands V2 need supports when printing?

Yes, Flying Figure Stands V2 will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Flying Figure Stands V2 available in?

Flying Figure Stands V2 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Flying Figure Stands V2 free to download?

Yes, Flying Figure Stands V2 is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Flying Figure Stands V2

Add to Collection