FlyingBear Ghost 6 extruder

===================ENG===================
FlyingBear Ghost 6 extruder for TPU and other soft filaments. To do this, you need to print this model and do the following: Cut off 2 pieces of Teflon tube (short) and sharpen them as in the photo and insert them into place (as in the photo). The part consists of 2 spare parts: the main element and the cover. The lid can be printed out of transparent plastic to monitor the printing process. But if you do not have such an opportunity, then you can print this part from any plastic. The filament does not jam and prints perfectly. I advise you to develop a mechanism by scrolling the extruder motor before installation.
===================RUS===================
Экструдер (голова) для FlyingBear Ghost 6 для печати TPU и прочих мягких филаментов. Для этого вам нужно распечатать данную модель и сделать следующее: Отрезать 2 куска тефлоновой трубки (короткие) и заострить их как на фото и вставить на место (как на фото). Деталь состоит из 2х запчастей