Thingiverse
Focbox Unity ESC Encloser Mount
door SanguineDrone
1
Downloads
1
Likes
0
Makes
This is an enclosure for the Focbox Unity dual ESC. It may fit the Xenith as well.
There's a few different versions with cutouts for motor, pwr, and heatsink, and several combinations too.
It mounts with some M3 screws, recommend some foam sticky tape/padding underneath, and threadlock. Also recommend same thing on the board to seal better.
Also recommend some caulking or silicone goop or similar for watersealing the wires.
Mounts underneath with 4x standard skateboard #10-32 screws.
There's a few different versions with cutouts for motor, pwr, and heatsink, and several combinations too.
It mounts with some M3 screws, recommend some foam sticky tape/padding underneath, and threadlock. Also recommend same thing on the board to seal better.
Also recommend some caulking or silicone goop or similar for watersealing the wires.
Mounts underneath with 4x standard skateboard #10-32 screws.
SanguineDrone publiceert ook op
3 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
