Foldable coat hanger

Simone Giertz invented a foldable coat-hanger and ran a kickstarter campaign. I designed a 3D printed version. Print SettingsMaterial: PLALayer height: 0.2 mm Perimeters: 3Top layers: 3 layers (concentric top layer pattern for hangers ideally)Bottom layers: 3 layersInfill: 30% (ideally cubic or gyroid)Supports: yes (just for holes and round underside of the coat-hanger) Print InstructionsPrint is easy, use supports for screw holes (use 1mm support/object xy distance for holes) and for bottom side of the round part only (use standard supports, not organic/tree). There is a 3mf for BambuStudio/OrcaSlicer with everything set up.AssemblyYou'll need:M3 bolt (ideally 10mm long)M3 nutSteps:Remove supports.Insert M3 nut into bottom part of the connector.Put coat-hanger into the bottom part.Put the top part of the connector on top.Screw in M3 bolt.Enjoy!