Foldable Gift Bows with Hearts

DIY Ribbon Gift Bows! This project comes on multiple plates - be sure to print all plates! Three different sizes are included:Large: 220mm wide arms, 130mm wide bow - only printable on X1 or P1 series. Prints on 3 plates.Medium: 160mm wide arms, 100mm wide bow - printable on X1, P1 and A1 series. Prints on 2 plates for X1 and P1 or 3 plates for A1.Small: 110mm wide arms, 70mm wide bow - printable on X1, P1 and A1 series. Prints on 2 plates for X1 and P1 or 3 plates for A1. A bow tying helper tool is included in this project - I recommend printing this in order to assist with the assembly. Instructions:You will have printed the following items:Large armsMedium armsSmall armsCentre loop2 x ribbon endsPinC-Clip To begin, you'll need the centre loop (rectangle with 2 holes), the pin and the helper tool: Start by pushing the pin through the back of the centre loop (the side the pin is sticking through will be the visible side for most pieces): Next, make a loop (with the front face of t