Thingiverse
Foldable Round Cable Chain
door EdwardMakesThings
58
Downloads
45
Likes
0
Makes
As seen on my instagram! @edwardmakesthings
This is a concept that was inspired by ProperPrinting, but I wanted to solve the problem of strength in the necessary axes... so I made a foldable design.
The inner-diameter of this design is 15mm. You should be able to scale up if needed but likely cannot scale down. I designed this as the smallest possible variant.
I recommend using pliers to close the links.
**There are 3 different styles so far:**
- A basic round cable that can be oriented in 4 different directions and rotate both back and forward.
- A "one direction" round cable that can be oriented in 4 different directions, but can only rotate forward. This is good for more constrained situations.
- A tight-radius round cable that can only be oriented in 1 direction but allows for tighter corners.
In the near future I would like to design variants which can be mounted to 2020 extrusion or other things to create corners or secured points.
This is a concept that was inspired by ProperPrinting, but I wanted to solve the problem of strength in the necessary axes... so I made a foldable design.
The inner-diameter of this design is 15mm. You should be able to scale up if needed but likely cannot scale down. I designed this as the smallest possible variant.
I recommend using pliers to close the links.
**There are 3 different styles so far:**
- A basic round cable that can be oriented in 4 different directions and rotate both back and forward.
- A "one direction" round cable that can be oriented in 4 different directions, but can only rotate forward. This is good for more constrained situations.
- A tight-radius round cable that can only be oriented in 1 direction but allows for tighter corners.
In the near future I would like to design variants which can be mounted to 2020 extrusion or other things to create corners or secured points.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
