Foldable Sonic-Pad Tablemount

Table holder for Sonic-Pad -- foldableThe Tablemount can be screwed under or on the table. I screwed them under the table because when the two printers are not needed, the Sonich Pad can be folded perfectly so that the displays are not in the way or accidentally damaged.The package includes the base for screwing to the Table, the left and right Display-brackets and two different clamping screw handles in two different sizes.To create a complete mount you need to print out a base, a set of display mounts (left & right) and two clamp handles of your choice.You also need the following material, which can easily be obtained from any hardware store for little money2 x M5x50mm countersunk screws and nuts for the clamping handles,5 x countersunk wood screws and 2 x M5 nuts for the base4 x M3x16mm Allen screws for the brackets to be attached to the display.I printed the brackets shown here in PLA+ black and white with a layer height of 0.15mm and an infiltrate of 40% so that everything is really stable and nothing can break because the Sonic Pads are too expensive for a risk of saving material.Assembly Tip: Heat the nuts with a lighter to assemble in the base and clamp handles. This will perfectly embed the nuts in the PLA+.Conclusion from me:Never again without a Sonic Pad it's just awesome what a difference it makes to the original control in terms of print quality and print speed. It really is two different worlds to print like this, the best upgrade for any Creality printer and worth every penny.Have fun