MakerWorld
Sport & Outdoors
Ver Modelo
Folding Knife 1
3
Descargas
4
Likes
0
Makes
I saw the knives that @maker209 was making and obviously fell in love .... naturally i had to try my hand at one or two of them because..... well... self control is overrated. anyways! here is my take on a folding knife. It uses a standard box cutter blade. its pretty simple, practical, and very sharp... be careful while putting them together. the shopping list:Spring (1x)Wire size: 0.7OD: 7mmLength: 25mmScrews (6x total, 3mm)Style and length are up to you, pick what feels right for you (more on that below) Assembly Notes (important stuff, read this part):To hold the blade section together, you’ll need three screws.⚠️ One of these MUST be machine screws, or the knife will refuse to close. ⚠️I used:Two 3x5 machine screwsOne 3x5 hex socket screw, which doubles as a thumb assist for opening the knife (because style matters) Body Assembly:The body needs three 3mm screws to hold everything together.Length depends on the look you’re going for.Right now, mine is temporarily held together with
PrinterInUse también publica en
96 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!