Folding Table Connector

This is a custom-designed connector for a camping table. The original aluminum slats were held together with an elastic cord, but I created this 3D-printed connector to allow the table to be foldable and more stable.

There are three different parts that fit into the aluminum slats. The "center" piece should be attached to the slats in the middle of the table. For the two slats at each end of the table, you need to print two each of the "end_right" and "end_left" pieces, totaling four pieces.

The internal dimensions of the aluminum slats on my table are 52x9 mm. The pieces are designed with one flat side, which should be placed face down when printing. Ensure that the side with two holes is oriented so the holes are visible from above when the piece is installed.

If your table is identical to mine, you can use the provided G-code file directly for printing. Ensure that your 3D printer has a print bed of at least 20x20 cm.

To secure the connectors, I used M4 bolts and nuts.