Folding Tablet Stand (Moga style)

[Update] I have reoriented the left and right leg for best printing with minimal supports. For most strength these parts would want to be printed laying down, but i'm currently doing a test print to see if this orientation is strong enough.

[Update 2] I have redesigned the base and rear leg slightly, the base now has a larger hole as the last one required cutting or sanding and the little tab for restricting movement now has a larger fillet to make it stronger.

[Update 3] If like me, you find that the little tab still breaks off easily, then print the "tab.stl" in .1 layer height at 100% infill in it's current orientation with supports, and glue it in place. Should solve your issue :)

Folding tablet stand, I pulled apart my Moga stand to see how it was designed.
This is not an exact copy of the moga stand, but it's as close as my current skill level in fusion 360 can get it.

Please note that your printer should be able to print with tolerances of 0.2 for most of the