Slicer Discord
Folding Utility Blade - VERSION 2.0 – 3D-printbaar model van MakerWorld MakerWorld
Hand Tools

Folding Utility Blade - VERSION 2.0

1.6k Downloads
693 Likes
881 Makes
Model downloaden
PLEASE USE WITH CAUTION. THIS IS A 3D-PRINTED KNIFE AFTERALL. IT SHOULD ONLY BE USED FOR LIGHT DUTY APPLICATIONS. BE MINDFUL OF THE BLADE AS YOU OPEN AND CLOSE THE KNIFE. Version 2.0 is really version 2.0 and 3.0 combined. One knife has a keychain loop (and has a place for storing 2 extra blades), and the other knife has a belt clip (can hold 1 extra blade). Both knives use 6mmx2mm magnets (You'll need 5 or 6 of them depending on model). Please don't cheap out on the magnets - you want really strong ones. I use these from Amazon and have had really good luck - https://www.amazon.com/dp/B07CVPC3YJ?ref=ppx_yo2ov_dt_b_fed_asin_title The “Knife Holder” and “Belt Clip” parts should be printed in PETG or another filament that has springiness. Don't use PLA for these parts. These print setting work best: 0.2 layer height, 3 walls, Classic wall generator (don't use Arachne), 100% infill, and a 38° Infill Direction. Here is a link to the first (minimalist) version: https://maker
Categorie
Hand Tools
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, PETG, Polycarbonate
Min. bedgrootte
50 mm (Klein)
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie