Foosball Table Leveler

Oddly enough, our Foosball table was not equipped with levelers. It is now level.

Hardware used:
12EA 6-32x.25" screws (4/adjuster)
4EA 1/2-13x1.5" carriage bolts (1/adjuster)
8EA 1.5" wood screws (2/adjuster)

Installation:
Use a 0.75" forstner bit to drill hole for insert. Use a 0.5" drill bit to drill deeper hole for carriage bolt to extend into when adjuster is fully retracted. Install and screw the insert into leg. I used a 1/2-13 tap to chase the threads in the insert, it made it very smooth to install the carriage bolt onto the insert (not required, but will make it easier to rotate the adjuster).
Assemble the rest, carriage bolt and adjuster. Screw them together with the 6-32x.25" screws.
Screw the adjuster into the insert.