Foot Pedal

*V3a Update 1/20/2018*
Noticed the ribs in the top were a smidge off-center. Just tweaked it a bit, it should be center, or at least close enough

*V3 Update 1/15/2018*
Redesigned to support printing without supports. Top cover pieces combined and minor tweaks to shape. New printed "spring" secures with just a spot of glue. .stl files oriented to print without supports. Only 3 parts to print with V3.

All V3 parts were printed in PETG, .6 mm layer height (.8 mm nozzle) for prototyping. I'm not sure if the spring would work in PLA. The prototype works well, so I'm probably not going to try in .3mm, but I'm guessing it would work just fine in .3mm.

The top cover needed some reheating with a heat gun, to take out some warps in the sides. 5 mm holes in the top cover I needed to ream out for smooth operation.

I'll leave the old files in case anyone wants to use them still. The old version works like a champ!

I had a USB foot pedal, but it broke. So, I ordered anothe