Thingiverse
Ford Capri Quad Lock Mount
door Dannybb
2
Downloads
7
Likes
0
Makes
A Quad Lock compatible mount for Ford/Mercury Capri's.
Designed to use double sided mounting tape to mount it in the car.
It is split into two parts for better printing:
- The screw version requires a M4x10 countersunk screw, and an M4 nut.
- I also made a glue version which can be glued together with CA glue or epoxy.
I printed the Lock piece face down, with a 0.08mm layer height.
The Base piece was printed on its side, also with a 0.08mm layer height.
No supports were used.
Designed to use double sided mounting tape to mount it in the car.
It is split into two parts for better printing:
- The screw version requires a M4x10 countersunk screw, and an M4 nut.
- I also made a glue version which can be glued together with CA glue or epoxy.
I printed the Lock piece face down, with a 0.08mm layer height.
The Base piece was printed on its side, also with a 0.08mm layer height.
No supports were used.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!