Ford Edge Sync 3 Brackets

Brackets for adapting the flat sided Sync 2 / 3 screen to a 2011 Ford Edge which has a stepped (recessed) side screen originally. I printed mine in PETG with 100% infill with one bracket screen side on build plate and the other with car side on build plate as I thought this would give the opposite strength/weakness of each other.

The bottom hole may tear away if you install and remove the brackets due to its thin sides and the fact the ford bolt heads bite into the surface to hold their place. I did not include the support posts (dowels on original steel brackets) to save print time and keep things simple.

If you use a stepped sided screen you do not need these. The original brackets will work in that case.

Cannot be used or remixed for commercial use. No warranty is implied and using brackets you do so at your own risk with no liability to the author.