Ford GT

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 1.8mm and the Actual Depth is 1.9mm In my own print i made a mistake with the color yellow i accidentally choose blue again. In the photo where you see it sliced in Bambulab you see what the outcome will be if the yellow is in there. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA Kexcelled Sky Blue Transmission Distance: 2.6 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 4.7 This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to BambuLab Green At layer #12 (1.04mm) swap to Sky Blue At layer #17 (1.44mm) swap to Yellow At layer #20 (1.68mm) swap to Jade White for the rest. Boost MeI hope you like the print if you do please