FormD T1 Custom Mod Collection

This is a custom parts collection for the ITX PC case FormD T1, including handles, feet, and rear panel spacers.To assemble you need:each Handle 3x M3x8mm screws, 3x M3 hex nutseach Feet 2x M3x8mm screws, 2x M3 hex nutsGPU spacer 2x M3x4mm screwsM/B panel spacer 2x M3x6mm screws, 2x M3 hex nutsAssembly Handle:Secure the handle to the top panel using M3 screws and nuts. While it's possible to directly use nuts on panel, I recommend using a 'nut bracket' to avoid scratching the panel. The handle has versions for the front and rear, so be careful not to mix them up! Assembly Feet:Secure the legs to the bottom panel using M3 screws and nuts. While it's possible to directly use nuts on the panel, I recommend using a 'nut bracket' to avoid scratching the panel.Assembly GPU Spacer:Print spacers according to the size of the GPU you will use and fix them with M3 screws.Assembly M/B Spacer:Secure the M/B spacers using M3 screws and nuts.Assembly M19 Cover:Print a design of your choice, either A