FormD T1 Side Panels

As seen in my YouTube video: The Ultimate FormD T1 Air Cooled BuildPanels require a large print bed (300mm+) and a well calibrated printer.They are somewhat experimental, trial and error may be necessary to get satisfactory results.The panels include 4 built-in break away supports which will need to be removed after printing.How to print:Import Panel.stl into your slicer (I recommend PrusaSlicer).Right click model choose Add Modifier and select the Infill.stl fileRight click the infill model in the sidebar and add the following settings:Infill density 10-30 (Depends on infill pattern, but higher density is better)Fill pattern Cubic, Gyroid (Recommended), Triangles, etcBottom solid layers: 0Detect bridging perimeters: Off (Eliminates ugly bridging at edge of infill area)Perimeters: 0-3 (For the infill modifier itself, I recommend 2)Top solid layers: 0Make sure the bridging for the overhanging panel lip is perpendicular, and if not, manually set the bridging angle.Recommended materials a