Formula 1 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 144.31x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.7mm and the Actual Depth is 2.5mmFilaments Used: PLA ESUN Black Transmission Distance: 0.3 PLA ESUN White Transmission Distance: 6 PLA ESUN Red Transmission Distance: 4This print uses 3 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #13 (1.12mm) swap to White At layer #21 (1.76mm) swap to Red for the rest.