Formula 1 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x113.13mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2mm and the Actual Thickness is 1.92mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 4.8 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #14 (1.2mm) swap to Orange At layer #18 (1.52mm) swap to Sunflower Yellow for the rest.