Fountain Water Feature

I had an old water feature pump and liner that I wanted to put into a large plant pot. The pot is around 340mm diameter and limited the throw of the pump so I designed a new grille and fountain head to suit.

This is a work in progress and currently the 4th iteration to improve on the size and position of the water jet. Further updates may happen.

You will need:

1x fountain head
1x upright
1x upright quadrant*
3x quadrants
1x bucket (with a 300mm, 12" top)
300mm or 12" (approx) of standard garden hose (connector is 1/2" or 13mm)
12 cable ties

The grille is made up of quadrants for easier printing. The drawing shows 2x upright quadrants because I'm working on another water feature with two mounts.

The quadrants are printed upside down. When connected they have an extra ring that sits inside the bucket to prevent sliding.

Use cable ties to secure parts together.