Thingiverse
Four-sided Coin
von edabot
17
Downloads
16
Likes
0
Makes
A coin within a coin. A coinception. Almost all of the functionality of a D4, but flatter.
100% infill
After printing, use a bit of oil to lubricate the connections. You'll want the inner piece to be able to spin several times if you flick it directly. This might require a bit of sanding.
To spin it, be sure to flip it in the air with your thumb striking the side of the coin that's away from the connection points. You'll be able to hear it if it spins correctly.
100% infill
After printing, use a bit of oil to lubricate the connections. You'll want the inner piece to be able to spin several times if you flick it directly. This might require a bit of sanding.
To spin it, be sure to flip it in the air with your thumb striking the side of the coin that's away from the connection points. You'll be able to hear it if it spins correctly.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!