fourth Wing no.3

Fourth Wing no.3 of 4 (no. 4 still to be uploaded ) these are picture illustration's of characters from the series of fourth wing books showing dragon riders and their dragons , i have done this one using cherry red (Sunlu) and an orange /yellow (Landu pla filament's plus sunlu mat black and anycubic white ProjeT FOURTH WING .hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112mm x169mm in size You may print X and Y LARGER , BUT Z MUST NOT BE below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Sunlu matt Black Transmission Distance: 0.3 PLA sunly cherry red Transmission Distance: 3 PLA Landu yellowy/orange Transmission Distance: 1 PLA Anycubic White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to cherry red At layer #13 (1.12mm) swap to yellowy orange At layer #18 (1.68mm) swap to White for the rest.