Slicer Discord
FPV arrow – 3D-printbaar model van Thingiverse Thingiverse

FPV arrow

39 Downloads
39 Likes
0 Makes
Model downloaden
well i had an extra camera laying around so i thought could o make an FPV arrow for archery and well here it is it uses an Ultra Micro FPV Camera and Video Transmitter from horizon hobby's and a 150mAh 1S 3.7V 45C LiPo Battery and a good old rubber band to hold the two half's together the arrow is an 1/3 inch shaft or 9.5 mm. due to my camera going on the frits i had to get a different camera.

WARNING this can damage your camera, arrow and even bow my camera only lasted 3 shots before the case broke and the camera died. and it will change the flight of the arrow. use at your own risk.

links below for both cameras and battery
Camera
https://www.horizonhobby.com/first-person-view-%28fpv%29--1/fpv-cameras--1/ultra-micro-fpv-camera-and-video-transmitter-spmva1100

Battery
https://www.horizonhobby.com/airplanes/batteries/150mah-1s-37v-45c-lipo-battery-eflb1501s45

second camera
https://www.ebay.com/itm/3-IN-1-FPV-Camera-System-including-Camera-Monuting-Bracket-for-BumbleB-W
Bron
Thingiverse
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie