FPV Camera Mount for Standoffs

If you like my work, please consider subscribing to my YouTube channel: https://www.youtube.com/c/TMacFPV

check out my website at https://tmacfpv.com/fpv-pilots-den/

or feel free to leave a Tip!

FPV camera mount that slides onto standoffs on either side of frame
Fits standoffs with outer diameter of approximately 4mm

Designed to be "pressure fit" to keep FPV camera stable during flight for good video

Distance between center of standoff holes is 20mm

Distance from center of standoff hole to outer edge of closest mount end is 2.5mm

Overall height of camera mount is 15mm

3 different camera mounting holes on mount allow for different camera positions
mounting holes are 7.5mm from bottom of mount

STL file is for 1 mount (2 are needed - 1 for each side of frame)