FPV Freestyle Drone HueForge

HueForge of my FPV FREESTYLE DRONE… I personally printed on an Bambu A1with AMS lite. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x139.59mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Hatchbox Pink Transmission Distance: 12 PLA Kexcelled Red Transmission Distance: 4.5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Pink At layer #12 (1.04mm) swap to Red At layer #21 (1.76mm) swap to White for the rest.