Thingiverse
Hobby
Go to Model
FPV Mini Display
206
Downloads
231
Likes
0
Makes
https://www.youtube.com/watch?v=dOwJ6KlTIeQ
Build a tiny portable FPV (First-person view) monitor! Great to use as a spectator display at an event or attach to your controller as a backup to goggles. It's rechargeable and has access to the band, channel and brightness controls.
Read the full guide on: https://learn.adafruit.com/fpv-mini-ground-station/overview
The 2.5" tft display is powered by a 500mAh lipo battery and a powerboost 1000c. The Eachine ER32 VRX AV receiver has 32 channels with frequencies from 5645-5945MHz. Small and low cost with a wide voltage input, it connects to the Powerboost 1000c.
You can edit the files here: http://a360.co/1RVqtpu
Build a tiny portable FPV (First-person view) monitor! Great to use as a spectator display at an event or attach to your controller as a backup to goggles. It's rechargeable and has access to the band, channel and brightness controls.
Read the full guide on: https://learn.adafruit.com/fpv-mini-ground-station/overview
The 2.5" tft display is powered by a 500mAh lipo battery and a powerboost 1000c. The Eachine ER32 VRX AV receiver has 32 channels with frequencies from 5645-5945MHz. Small and low cost with a wide voltage input, it connects to the Powerboost 1000c.
You can edit the files here: http://a360.co/1RVqtpu
adafruit also publishes on
1 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
