fpv plane

thank you https://www.thingiverse.com/thing:6622923 .

took a lot of inspiration from fpv wing racer

if you want to contact me, please do so through telegram
maiden, basically: https://t.me/fpv_videos/274
more darring moves: https://t.me/fpv_videos/276
1505 4inch: https://t.me/fpv_videos/282

1404 4500 + 3-4 inch + 4s 600mah = ~200gr
wish it was around 150
3.5-4inch prop is recommended

edit - now I recommend 1505 2900kv with 4inch 4s


servos a regular 5g blue ones. need only 2. one for roll, one for pitch
for the tail you need 15cm 5mm square carbon tube.

actually, after minor modifications chassis can hold 4 servos, 2 for the roll, 1 for pitch and 1 for yaw. Or 2 for the roll, 2 for the V-tail


edit - added a thingy for wall mounting

edit - 1505 with 4 inch prop is FIIRE

edit - added new wing, chassis, camera stool and roll link (fcnkwng_v505.stl, CHASSS_ANALOG_1505.stl, camera_stool.stl, link.stl

edit - soo I decided to say goodbye to square tube