Slicer Discord
FPV Racer "Pickup" – 3D-Druckmodell von Thingiverse Thingiverse

FPV Racer "Pickup"

von lentaa
41 Downloads
33 Likes
1 Makes
Zum Modell
Added new top and bottom part (v5). Bottom is now solid, better to fly in wet or snowy conditions. Also USB connector hole is added to the top cover.

FPV Racer "Pickup" first flight: https://youtu.be/MDNl5mtrBoI
Testing cheap Chinese camera Xiaomi Yi: https://youtu.be/tbeof8yNsVI
Cruising in the backyard https://youtu.be/57ki90j5rQY

Hardware list:

Motor 1806 + 16A esc + probs:
http://www.hobbyking.com/hobbyking/store/__82987__DYS_BE1806_2300KV_Combo_set_with_16amp_Opto_Speed_Controllers_X_4.html
FC:
http://www.hobbyking.com/hobbyking/store/__69348__AfroFlight_Naze32_Acro_FunFly_Controller_EU_Warehouse_.html
PDB:
http://www.banggood.com/Matek-Micro-PDB-With-5V-12V-Dual-BEC-Output-For-FPV-Multicopter-p-1031896.html
Lipo :
http://www.hobbyking.com/hobbyking/store/__26704__Turnigy_nano_tech_1300mAh_3S_45_90C_Lipo_Pack_UK_Warehouse_.html?strSearch=1300
Vtx :
http://www.hobbyking.com/hobbyking/store/__63114__SkyZone_TS5823_5_8GHz_32CH_A_V_200mW_Mini_FPV_Transmitter_v2_.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
TPU
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen